FLUNA ANTI FOG

Fluna Anti-Fog solves one of the most annoying problems when using optics such as riflescopes, spotting scopes, and binoculars: When moving from indoors to outdoors or from a vehicle to outdoors, the optics fog up and prevent the necessary clear view.

Applying Fluna Anti-Fog creates a fine film on the glass. The solvent-based coating is easily and economically sprayed on using a pump bottle and will not damage your valuable optics. Fogging of glass surfaces due to temperature changes is prevented – and best of all: The anti-fog effect for your hunting optics and specialty lenses lasts for several days to weeks, depending on use and application.

Notes:

1. Areas of application : Fluna Anti Fog is suitable for all types of glass, especially for hunting optics such as rifle scopes, binoculars and spotting scopes.
2. Duration of effect : The anti-fog effect lasts for a few days to weeks, depending on the use and area of​​application.
3. Recommended products : For optimal results, we recommend using Fluna TFT Optics Cleaner and Fluna Isopropanol before applying Fluna Anti-Fog .
4. Preparation :
   • Removing coarse dirt : First, remove coarse dust from the optics using a brush or compressed air.
   • Cleaning : Then clean the surface with Fluna TFT Optic Cleaner to get a streak-free, clean glass.
   • Degreasing : In the next step, degrease the optics with Fluna Isopropanol to ensure that no grease or oil residues impair the effectiveness of the anti-fog coating.
5. Application of Fluna Anti-Fog :
   • Spraying : Spray Fluna Anti-Fog thinly and evenly onto the dry glass surface.
   • Leave to work : Leave the product on for a few minutes to allow a fine film to form on the glass.
6. Aftercare :
   • Polishing : Polish the lens with a clean lens cleaning cloth until the surface is clear and streak-free.
   • Drying time : Allow the optics to dry for about one hour before using them again.